Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13629631

- Product Categories
- Friendly Links
Information Name: | How to install outdoor racks? |
Published: | 2015-01-26 |
Validity: | 300000 |
Specifications: | |
Quantity: | 0.00 |
Price Description: | |
Detailed Product Description: | How to install outdoor racks? Here are the steps to install outdoor racks specific description and should pay attention to: iron set of four, two of which are single-bearing, two of which are double bearing, double bearing mounted near the hand in that direction . Corner mounted just above the hand, the hand is away from the surface to about 1.5 meters in height, the height can be adjusted at the situation, but with the hand corner must remain vertical, a rope in use to ensure that the process does not rub the hand The shell (such as friction generated after glitch difficult to handle possible, may also wear off) method rope wear should be: From the corner, across the corner of one end bearing, and then through the double bearing above bearings, wear After another single through the iron bearing hanging, through boom son of rings, tie fixed; the other end of the rope through the first corner of the bearing is then passed through the following two-bearing iron a reminder after bearing down, fixed knot through the rings. (Note: The fixed knot rings through the front seat to put on top of the decorative cover, because you can put the rope after the decorative cover to the iron a) fixed the pole through the rings, and then adjust the pole position in the middle of the rope two rope length, in the pole position to maintain the level of fixed rope to the hand is in line with the buckle. (Note: sometimes is not the same as the height of the house, there may be too long rope can cut off part of the rope) and then put the plug in the two pole, hanging racks to be installed. (13 points within five expansion screw expands eight outer expansion, eight outer expansion is a top seat fixed on the ceiling.) Some models use wind hanger into wind head and the hanger body in two parts, need to be assembled together , wind head into the boiling water soak will easily install into. [Li, 18326057573] outdoor racks installation methods described here, more racks mounted racks Rongshida just visit the official website: http: //www.rsdlyj.com |
Admin>>>
You are the 17225 visitor
Copyright © GuangDong ICP No. 10089450, Hefei Rongshida Electronic Appliance Group Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 17225 visitor
Copyright © GuangDong ICP No. 10089450, Hefei Rongshida Electronic Appliance Group Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility